With the rapid development of the logistics industry and the transportation industry, more and more companies use plastic turnover boxes for product transportation and turnover. The plastic turnover box industry has been favored by many people. Normally, enterprises use normal turnover boxes, and the service life can reach 5-8 years, but if used improperly, the service life will be greatly reduced. Generally speaking, the crate is relatively strong and durable, but it also has its most vulnerable parts, let us understand the fragile parts of the crate.
The fragile parts of the plastic pallet box are the four corners of the box. Especially when the four corners directly fall from the height and touch the ground, it is very prone to breakage. Usually, the four faces directly contact the ground without this problem Although the tote box is relatively durable, it should be cherished as much as possible, so that it can be handled lightly and avoid being thrown and thrown.
To make the four corners of the box less susceptible to damage, on the one hand, the four corners need to be reinforced during production, on the other hand, the use of materials, remember to use new raw materials, if you use secondary materials or waste materials The one made must be particularly fragile.
KINGTAI plastic totes are made of special polypropylene and polyethylene.
This special material has a harder and more transparent surface and can tolerate higher temperatures. The bottom of the box is designed with high-density ribs in the mesh format to make the load-bearing capacity stronger. , More difficult to damage. And our folding turnover box can save space after being folded, which is very suitable for logistics companies.
